When was the last time the roof of your building was inspected? If it’s been awhile, the roof could have problems lurking that require immediate attention. Some roof problems cause obvious signs such as for example leaks, while others produce subtle signs that are only detectable on the surface. In either case, leaving the issues unaddressed can cost you thousands when you finally repair them. If the roof on your own building has the problems listed below, a company that specializes in commercial roofing should repair them quickly:
Roof panels buckle because of weather damage and poor installation. Whatever the cause, the buckling allows wind to blow within the panels, making them loose. Because the problem worsens, the panels start to fall off, often coming off in large sections whenever a storm hits. Buckled panels are perhaps one of the most commonly fixed problems by companies that perform roof repair.
Expended Screw Holes
Expanded screw holes are another problem for panel roofs. Over time, wind and fluctuating temperatures cause the screw holes in panels to widen round the screws that contain the panels in place. This creates an area where water can leak within the panels and soak the roof deck. After the deck becomes saturated, the thing is costly to fix.
Improper heating procedures and dry lapping cause hot bituminous roof systems to blister. Although small blisters seldom pose an issue, large ones can rupture and invite water to seep beneath the bitumen. Once the blisters form, warm weather typically makes them worse. As a result of humid subtropical climate in a few regions of the country, commercial roofing frequently experiences blistering.
Blocked drains and improper sloping can cause water to assemble in small ponds on a roof. Repairing a blocked drain is simple, but fixing a sloping problem is more complex. Often, installing a taper insulation system to determine a new slope is best solution. Through the rainy season, resolving ponding water is probably the most common types of roof repair.
Flashing prevents water from seeping in the crevice where the roof abuts to protrusions such as chimneys and vents. Over time, most flashing should be resealed. If it’s not, leaks could cause serious damage the deck and building interior. Most flashing problems are corrected during the course of scheduled maintenance.
Chimneys and high parts of brick walls that have sections of missing mortar could cause leaks. These leaks tend to be mistaken for leaks in the roof membrane, but a thorough inspection by a company that specializes in commercial roofing will reveal the true problem. Most parts of missing mortar can be repaired with basic tuck pointing procedures.
The problems above are some of the most common reasons for roof repair. When they are corrected early, most problems are inexpensive to fix, but not addressing them until they cause serious problems may necessitate roof replacement. Having Roof moss removal near me scheduled maintenance agreement with a roofing company is the better solution to ensure problems are detected early.